How tall a horse fence should be
Penn State Extension recommends horse fences 54 to 60 inches tall, with the top of paddock and pasture fences at about wither height so horses won't flip over it. Large horses, stallions and good jumpers may need more.
At the bottom, leave about 8 inches of clearance: enough that a hoof won't get trapped, but low enough to discourage reaching under for grass. A bottom rail no higher than 12 inches keeps foals from rolling under.
Safety rules of thumb
From the same Penn State guidance:
- Make it visible. Horses running in play can hit a fence they can't see; wire is the least visible, so boards or strips are often added.
- Keep the horse side smooth, with no sharp edges or projections.
- Keep gaps between rails or strands at 12 inches or less.
- Use mesh openings under about 3 inches, so hooves and heads can't get caught.
- Avoid barbed wire for horses; it's cheaper, but it often leads to vet bills.
- Round the corners, so a dominant horse can't trap another one.
- Skip diagonal cross-bracing on gates, which can trap legs and heads, and avoid metal or fiberglass T-posts.
Sources: Penn State Extension
Common horse fence types
Board fences are highly visible and the traditional look around Chester County farms. Mesh fences keep hooves and smaller animals out and are often topped with a board for visibility. High-tensile wire allows much wider post spacing, though its diagonal corner bracing needs care so horses can't get caught in it.
Electric fence works as its own fence or alongside another one: a single strand 4 to 6 inches above or inside the top rail keeps horses from leaning on and reaching over the fence.
Sources: Penn State Extension
Posts
Wood posts are recommended, and pressure-treated posts can last 10 to 25 years. Driven posts are more rigid than hand-set ones. Line posts are typically set about 36 inches deep, while corner and gate posts are about 25% larger in diameter and set about 48 inches deep, because they carry the most strain.
Sources: Penn State Extension


